AY180
Machine Technical Date:
| Injection Unit | ||||
| Shot volume | cm3 | 
 289  | 
 366  | 
 452  | 
| Shot weight (PS) | g | 
 266  | 
 337  | 
 415  | 
| Oz | 
 9  | 
 11.9  | 
 15  | 
|
| Screw diameter | mm | 
 40  | 
 45  | 
 50  | 
| Injection pressure | Mpa | 
 234  | 
 185  | 
 150  | 
| Injection rate | g/sec | 
 147  | 
 187  | 
 230  | 
| Screw L/D ratio | L/D | 
 23.6  | 
 21  | 
 18.9  | 
| Screw stroke | mm | 
 230  | 
||
| Screw speed (stepless) | Rpm | 
 0 ~ 220  | 
||
| Clamping Unit | ||||
| Clamping force | Ton | 
 180  | 
||
| Opening stroke | mm | 
 450  | 
||
| Platen size | mm | 
 780 x 730  | 
||
| Space between tie bars | mm | 
 520 x 470  | 
||
| Max. daylight | mm | 
 990  | 
||
| Mold thickness (min-max) | mm | 
 180 ~ 540  | 
||
| Hydraulic ejector stroke | mm | 
 150  | 
||
| Hydraulic ejector force | Ton | 
 4.5  | 
||
| Ejector pin | pcs | 
 5  | 
||
| Hydraulic Unit | ||||
| Hydraulic system pressure | Mpa | 
 17.5  | 
||
| Pump motor | kW | 
 18.5  | 
||
| Servo driver power | kW | 
 18.5  | 
||
| Heating capacity | kW | 
 12  | 
||
| Number of temp control zones | pcs | 
 4  | 
||
| General Data | ||||
| Oil tank capacity | L | 
 260  | 
||
| Machine dimensions | m | 
 5.1 x 1.4 x 1.9  | 
||
| Machine weight | Ton | 
 6.5  | 
||
Ferrimino series Injection unit
- Swiveling type + Two layers Linear Guide Rails Injection Unit
 - Swiveling designed injection unit helps change screw and barrel to be much easier
 - Two layer linear guide rails helps shorten the length of injection unit support device, less deformation of the support device
 
Ferrimino series Clamping unit
- Wider range space between tie-bars, more molds size available and able to meet the needs for automatic mold installation system.
 - Long and wider designed movable platen moving feet ensure stable mold open and close movement
 - Ejector with adjustable stroke, meets more special ejector movements
 
Write your message here and send it to us







 
 
 
 



